Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Slide-In Wide Bin Divider
A flat 73.6 x 50 x 2.0 mm divider for the Divided Wide Pegboard Bin, part of the '1/4 in Pegboard Locking-Peg Tool Wall' kit. It slides into the bin's 2.9 mm wide x 1.5 mm deep grooves at X = -25.4, 0 and +25.4, leaving 0.45 mm clearance per side and 0.4 mm at each end. The bin hangs from standard 1/4 in pegboard (6.35 mm holes on a 25.4 mm grid). A 24 mm finger notch lets you lift the divider out, and 1.5 mm chamfered bottom corners help it drop into the grooves.
Slide-In Cleat Bin Divider
A removable compartment divider for the 'Printed French Cleat Bin Wall' kit. It is a flat plate 94.7 x 38 x 2.0 mm and drops into the 2.8 mm wall grooves of either the Small Scoop or the Wide Twin-Hanger bin. No screws or other hardware are needed. It has 0.4 mm of clearance at each end and on each face, a 20 x 10 mm semicircular finger notch for pulling it out, and 0.8 mm lead-in chamfers on the bottom corners.