Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Pinch-Bolt 1/2 in EMT Rail Parts Bin
A 90 x 60 x 50 mm open parts bin with a 45° V-roof hook that hangs over a 1/2 in EMT conduit rail (17.9 mm OD) above a bench. One M4 x 35 bolt goes through 4.5 mm holes in the bin's rear pillar and the flexing back leg and pinches the rail, so the bin can't rock forward when it's loaded and you can slide it anywhere along the rail. The rail needs at least 25 mm of wall standoff to clear the 3 mm back leg.
PVC And EMT Offcut Socket Wall Rack
This wall rack has five upright sockets that keep short pipe offcuts sorted by size: 1 in (33.4 mm OD), 3/4 in (26.7 mm) and 1/2 in (21.3 mm) schedule 40 PVC, plus 3/4 in (23.4 mm) and 1/2 in (17.9 mm) EMT conduit. Each 36 mm deep socket is 1.5 mm over the pipe's OD and has a drain hole in the floor. The 156 x 52 mm back plate takes two #8 wood screws.