Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Pegboard Driver And Plier Bar
A 126.2 W x 50 D x 60 H tool bar for standard 1/4 in pegboard (6.35 mm holes on a 25.4 mm grid), part of the '1/4 in Pegboard Locking-Peg Tool Wall' kit. It has six chamfered drop-through holes (8, 10 and 12 mm, for screwdriver shafts up to about 7, 9 and 11 mm) and two 10 x 28 mm plier slots. It hangs on two of the kit's printed octagonal hook pegs at X ±50.8 mm and is locked by two split, ridged lock pins 25.4 mm lower, through 5.8 mm octagon sockets in the 5 mm back plate.
Hanging Graduated Tool Shelf
A 100 x 60 mm L-shaped tool shelf, part of the 'Printed French Cleat Bin Wall' kit. It bolts to one Cleat Bin Hanger Bracket with two M3x12 socket head cap screws, which pass through 3.4 mm holes at 15 and 45 mm on its 4 mm back plate and thread into the hanger's captured M3 nuts. The 6 mm deck has seven 9 mm screwdriver and awl holes at 12 mm pitch and five 14 mm plier and marker holes at 20 mm pitch. Two 5 mm gussets brace the deck.
Graduated Pliers And Cutter Wall Rack
A 130 x 52 x 34 mm wall rack that holds five pliers nose-down in graduated through-slots (11, 13, 15, 17 and 20 mm wide, 24–32 mm long) so needle-nose, side cutters, combination and water-pump pliers each get a slot that actually grips instead of rattling. The 11 mm shelf has a 2 mm stepped lead-in around every slot for one-handed drops, four 45° gussets tie the shelf to the back plate, and two 4.5 mm M4 clearance holes on 90 mm centres take drywall anchors or a stud screw.