Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
2020 Extrusion Bolt-On Three-Cell Parts Bin
A 120 x 55 mm three-cell scoop bin that bolts to the side of any 2020 aluminium extrusion workbench, test rig or robot frame using two M5 bolts and T-nuts (5.5 mm clearance holes, 80 mm apart). A 5.6 mm locating rib drops into the 6 mm T-slot so the bin stays level. The sloped 45 mm-to-30 mm rim and 45° scoop ramps let you sweep screws out with a fingertip. It keeps small fasteners on the frame, right where you're working, instead of loose on the bench.
2020 Extrusion Offcut Rack With T-Nut Trough
This bench rack has eight 20.9 mm square sockets that hold 2020 aluminium extrusion offcuts upright. Next to the sockets is a 94 x 20 mm open trough for M5 T-nuts and screws. Each socket has a 10 mm push-out hole in the floor, and the rack screws to a bench through two M4 clearance holes. Overall size is 100 x 75 x 30 mm.