Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
2 in Hitch Ball Mount Wall Socket
Wall-mounted open-top square socket that stores a standard 2 in receiver hitch ball mount by its shank, so the drawbar stops kicking around the garage floor. The socket is 52.5 mm square inside and 70 mm deep, with 16.6 mm slots in both side walls so the 5/8 in hitch pin and clip pass through the shank's pin hole and lock the mount in place; the 92 x 100 mm back plate takes three #10 wood screws through 5.5 mm holes into a stud.
Hitch And Clevis Pin Sorting Rack
A 150 x 54 mm bench rack for trailer, mower and farm-equipment pins. It has five size-stepped sockets for 1/4, 5/16, 3/8, 1/2 and 5/8 in (6.35–15.9 mm) clevis and hitch pins, with bores 0.65 mm oversize at 7.0 to 16.5 mm. Each socket is marked with 1 to 5 dimples. A front tray with three bays holds cotter pins, R-clips and linch pins, so they stop tangling in one bin.