Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Printed 45 Degree Cleat Rail
A 200 mm long French-cleat wall rail for the 'Printed French Cleat Bin Wall' kit. It is 12 mm thick and 45 mm tall, with a 45° bevel that the kit's hanger brackets hook onto. It takes three #8 wood screws (4.2 mm shank) through 5.0 x 10 mm slots, with a 10.5 x 15.5 x 4 mm counterbore for the head. Each end has two blind holes 4.3 mm across and 11 mm deep, which take 4 x 20 mm steel pins to join rails end to end. It prints flat on its wall face with no supports.
Under-Cabinet Three-Mug Hook Rail
A 150 mm rail that screws to the underside of a kitchen cabinet or shelf with two #8 wood screws (4.5 mm clearance holes, 50 mm apart). It hangs three mugs on J-hooks set 50 mm apart, each with a 14 mm handle gap. It prints on its side, so the mug load pulls along the layers and doesn't split them apart, and gussets at each hook root stop the hooks from snapping off.