Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Cam-Lock Housing And Bolt Rebore Jig
An L-shaped drilling jig for moving a blown-out flat-pack cam lock to fresh wood on an 18 mm panel. The 8 mm guide plate takes a 15 mm Forstner bit, and the edge fence lines up an 8 mm bit so the bolt hole meets the housing at mid-thickness (9 mm down). It has two stations: the housing centre sits 24 mm or 34 mm in from the panel edge. Overall size is 90 x 58 x 28 mm.
35 mm Euro Hinge Cup Boring Guide
A fence-located drill guide for boring 35 mm concealed (Euro) hinge cups. Hook the 12 mm fence over the door edge and it holds a 35 mm Forstner bit 22.5 mm from the edge, which gives the standard 5 mm edge distance. A 10 mm deep guide bore keeps the bit straight, and two 3.4 mm awl/pilot holes mark the common 45 mm × 9.5 mm screw pattern. Sight notches in the fence and on the far edge line up with your pencil mark, so you don't have to buy a $40 hinge jig for one kitchen refit.