Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Five-Slot Hang-Down Utensil Wall Rack
A 160 mm wall shelf with five 14 mm keyhole slots on a 30 mm pitch. You drop the handle of a spatula, ladle, whisk or wooden spoon into a slot and the head sits on top, so wet utensils hang apart to dry. It mounts with two #8 (4.2 mm) countersunk wood screws 60 mm apart, has six 45° fins under the 50 mm-deep shelf, and prints upside down with the shelf flat on the bed, so it needs no supports.
Universal Roller Shade Pin-End L Bracket
L-shaped replacement bracket for the idler (pin) end of a roller shade, replacing cracked or discontinued brand brackets without changing the tube ends. A closed tapered slot (4.6 mm at the bottom widening to 10.8 mm at the top) self-seats any round spring-loaded idler pin from 5 to 10 mm diameter; the pin axis stands 30 mm off the wall plate so tubes up to 38 mm OD clear it. Four 4.5 x 14 mm vertical slots take #8 pan-head screws for outside mount (wall leg) or inside mount (pin leg) and give 10 mm of height adjustment to level against your existing clutch bracket. 60 x 24 x 56 mm, 4 mm plates with a 6 mm corner web, printed standing so load runs along the layers.