Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
M5 Bolt-Through Hummingbird Feeder Ant Moat
A water-filled ant moat that hangs between your hook and a hummingbird or oriole feeder. The 76 mm OD cup is 30 mm deep and has an anti-slosh inward lip. A sealed 14 mm column rises above the waterline and carries an M5 eye bolt through a 5.5 mm bore into a captured M5 nut (8 mm AF) underneath, so the steel takes the feeder's weight and the plastic only holds water.
V-Clamp Bird Feeder Baffle Collar
A 100 mm flanged collar with a 90° V-bore and one M5 clamp screw. It locks onto any feeder pole from 9 to 34 mm, from 3/8 in (9.5 mm) rod through 3/4 in EMT (23.4 mm) up to 1 in Sch 40 PVC (33.4 mm), and gives a squirrel baffle a flat seat to rest on. The M5 nut drops into a slot so the screw pushes the pole into the V. Four 5.5 mm holes in the flange let you zip-tie or bolt the baffle down. Use it flange-up with an M5 x 50 bolt or thumb screw.