Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Rain Shower Arm Wall Brace
A screw-to-wall truss brace that holds up a long, sagging rain-shower arm with a 90° V-saddle sized for 19–22 mm OD arms (1/2" IPS pipe is 21.3 mm). Zip-tie slots strap the arm down. The saddle supports the arm 50–112 mm out from the wall and clears a cover plate up to about 80 mm across. Two 5.5 mm holes take #8/#10 screws, with a driver access hole for the top screw. Overall 112 x 117 x 20 mm.
Winch Fairlead Top Brace
This top brace is part of the 'N20 Self-Locking Worm-Drive Winch' kit. It is a 96 x 50 x 6 mm ribbed plate that bolts across the tops of both 608 bearing cheeks with four M3x12 socket head cap screws, which go into the cheeks' M3 heat-set inserts through 3.4 mm holes with 6.5 mm counterbores. It holds the cheeks square and guides the line through a 32 x 10 mm round-ended hawse slot. The slot has 1.5 mm 45° chamfers top and bottom so the line never rubs on a sharp edge.