Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Medicine Cabinet Cone-Knuckle Door Hinge
This print-in-place surface butt hinge replaces the discontinued tri-view (Mepla-style) concealed hinges on medicine cabinet mirror doors. It stands 60 mm tall, and each leaf is 36 x 4 mm. The leaves have four 4.5 mm holes for #6 (3.5 mm) or M4 pan-head screws. The knuckles pivot on a 5 mm pin in a 6 mm bore, and the knuckle faces are 45° cones with a 0.5 mm gap, so the hinge prints with no supports and the door weight is carried by the cone seat.
Cabinet Pull Drilling Jig
A 178 x 50 x 8 mm drilling jig for cabinet door and drawer pulls, with 5.5 mm drill guide bores laid out symmetrically at 76.2 mm (3 in), 96, 128 and 160 mm hole centers plus a single center bore for knobs. The 6 mm fence rib stands 10 mm proud and registers on the door or drawer edge; the two bore rows put the holes 20 mm or 35 mm from that edge, and a 4 mm centerline trough lets you line the jig up on a pencil mark.