Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
RV Cabinet Self-Latching Spring Bolt
A surface-mount latch that prints in place. The bolt is pushed out by a built-in serpentine flexure spring. Its 45° ramped nose rides over a strike and snaps behind it, and a flared thumb tab pulls it back 6.5 mm to open. It replaces cracked RV and camper cabinet snap latches. The 44 x 32 x 18 mm body fixes to the door with two #8 wood screws through 4.5 mm holes, and the bolt sticks out 6 mm past the housing to catch behind a face frame or a screwed-on block.
Flex-Arm Childproof Cabinet Hook Latch
A screw-in child-safety latch for cabinet doors with a face frame. It has an 84 mm flex arm that mounts to the back of the door and a 26 mm catch with a 7 mm drop lip that mounts under the face-frame rail. The door opens about 20 mm, then the 7 mm hook stops it until an adult presses the arm down. Both pieces print together on their sides, joined by a snap-off tab, so the arm bends along the layers instead of across them. Mounting holes are 3.9 mm, for #6 (3.5 mm) or M3 pan-head screws.