Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Pi 4 VESA 75/100 Monitor Back Mount
A 114 x 114 mm vented plate that fits both VESA mount patterns: 75 x 75 and 100 x 100 mm, with 4.5 mm M4 clearance holes. It turns a Raspberry Pi 4B / 3B+ into a thin client or kiosk bolted to the back of a monitor. The Pi sits 8 mm up on four standoffs that match its 58 x 49 mm hole pattern, with M2.5 clearance holes and screw-head counterbores on the monitor side. The board clears every VESA screw head, and a pair of zip-tie slots holds the power cable as strain relief.
Bike Tube Bottle Cage Adapter
A cable-tie-on bottle cage mount for bikes with no braze-on bosses: a 26 x 26 x 90 mm block with a 90-degree V groove that self-centres on round tubes from about 22 to 32 mm, and two M5 cage bolt bores on the standard 64 mm boss spacing with captured 8 mm hex nuts loaded from the side. Two 8 x 2.8 mm tunnels take 4.8 mm standard or 7.6 mm heavy-duty zip ties that wrap the tube and pull the groove down onto it.