Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Three-Caliper Wall Holster With LR44 Wells
A screw-on wall shelf that holds three digital or vernier calipers vertically. The beam drops through a 7 x 24 mm slot, which takes 150 and 200 mm calipers with beams 16–22 mm wide, and the slide head sits on the 54 mm deep shelf. Four 13 mm wells keep spare LR44/SR44 button cells (11.6 x 5.4 mm) next to the calipers, and the rack mounts to the wall with two #8 wood screws through 4.6 mm holes.
Flagged: hydraulic brake system. Not for safety-critical use without independent engineering review.
M5 Pivot Outside Transfer Calipers
A pair of 140 mm bowed outside transfer calipers that print already assembled. The legs turn on a 11 mm hollow printed pivot pin with 0.45 mm of clearance. An M5 bolt goes through the pin, with a 15 mm washer underneath and a nylock nut in a hex pocket on top, so you can set the drag. The jaws open to about 60 mm and let you take the OD of pipe, dowel or turned work across to a rule or calipers.
Flagged: hydraulic brake system. Not for safety-critical use without independent engineering review.