Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Rocker Ink Blotter With 5 mm Rod Paper Lock
A 110 x 45 mm rocker blotter with an R110 rocking face for fountain-pen and dip-pen ink. You change the paper without screws: cut a strip about 45 x 150 mm, tuck each end into a 1.2 mm slit that leads to a 6 mm groove, then push in a 45 mm length of 5 mm steel rod or dowel to lock it, like a screen spline. The ribbed open body keeps the material down, and a T-bar grip sits on top.
Rotary-Disc Lettering Guideline Template
This is an Ames-style lettering guide: a 120 x 80 x 4 mm frame holding a 65 mm disc that prints in place and turns freely. The disc has three columns of 1.6 mm pencil holes: an even 4 mm pitch, a 3/5 lowercase ratio and a 2/3 ratio. Turn it to an index tick to set guideline spacing at 4, 3.5, 3, 2.5 or 2 mm, then put a 0.5 mm pencil in a hole and slide the frame along a T-square or ruler. The frame's 68° slant edge and 90° edge draw italic and upright slant lines.