Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
8 mm Pin Rip Fence Cam Lock Lever
A replacement eccentric cam lever for benchtop table saw rip fences and other cam clamps. It pivots on an 8 mm steel pin or bolt (8.3 mm slip bore) and its spiral lobe rises 4.5 mm, from 13 to 17.5 mm radius, ending in a flat locking dwell. The lever is 117 mm long with a 12 mm thick cam, so you can swap it in for a broken OEM lever without buying a whole new fence.
4 in Dust Hose Cam Lever Cuff
One-hand quick clamp for nominal 4 in flexible dust hose and tool ports: a 104 mm ID, 20 mm tall band with a 2.4 mm flexing wall and a print-in-place cam lever that draws the ears ~4 mm together, so it grips hose measuring 100–107 mm OD without a screwdriver. Replaces an expensive large-diameter worm clamp that kinks thin-wall hose; the spiral cam slot detents at the closed position and the lever pivots on a captured 5 mm pin.