Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Phone Stand With USB-C Cable Pass-Through
A 100 mm tall, 56 mm wide desk phone stand with a 65° backrest and an open triangular frame to keep plastic use low. Its 12 mm deep seat takes phones in thick cases. A 12 mm slot runs down through the seat into a 10 mm channel under the base, so a USB-C or Lightning plug stays in while the phone stands and the cable comes out the back, not off the front edge of the desk.
Five-Cable Keyhole Charging Dock
A 116 x 28 x 22 mm desk bar that keeps five charging cables parked at the desk edge, so they stop sliding off and falling behind the desk. Each cable presses down through a narrow throat into a round keyhole bore. The bores are sized 3.5, 4.0, 4.5, 5.0 and 5.5 mm to fit thin phone leads up to thick USB-C PD and laptop cables. The plug heads rest on the sloped front face. It fixes down with two M4 or #6/#8 screws through 4.5 mm counterbored holes, or with tape, and has cored pockets underneath to save material.