Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Chest Freezer Basket Hanger Bracket
A replacement end hanger for a chest freezer wire basket. Its 6 mm wide cradle holds the basket's top rail wire (anything up to about 5.5 mm thick) and is locked on with two zip-tie slots that take ties up to 4.8 mm wide. A 35 mm foot with a stop lip sits on the freezer's inner ledge and holds the basket about 45 mm below it, so a basket with a snapped hanger works again without buying a whole new basket. The part is 45 x 56 x 20 mm and prints flat, so the basket's weight bends it along the layers instead of pulling them apart.
Chest Freezer Corner Caster Cradle
This corner cradle is 90 x 90 mm with 5 mm walls 28 mm tall. It lets you put a chest freezer, big cooler or tool chest on wheels without drilling into the cabinet. Each corner drops into a cradle, and a square-plate swivel caster bolts to the flat 10 mm underside. Four diagonal 8.6 mm slots take M8 or 5/16 in bolts on any square hole pattern from about 40 to 59 mm. 18 mm-wide pockets, 5 mm deep, keep the nuts and washers below the top face.