Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Toilet Drop Closet Bolt Guide Cone Pair
A pair of 55 mm tall tapered guide cones that grip the 5/16 in closet bolts. When you lower the bowl, its bolt holes slide down the cones, so it lands centred on the wax ring and doesn't slide around and smear the seal. Each cone is 15.5 mm at the base and 12 mm at the tip, so it passes through standard toilet base slots and pulls straight up and off after the bowl is seated. The 8.4 mm bore has three crush ribs (7.4 mm across) that grip the threads, and the two cones print joined by a snap-off tab.
Snap-On Toilet Bolt Cap And Washer
A replacement toilet closet-bolt cover: a 34.6 mm dome cap, 37 mm tall, that snaps over a 28.8 mm retainer washer. The washer has an 8.5 mm bore for 1/4" and 5/16" closet bolts and sits under the nut. Both pieces print nested as one job, and the four flex fingers let the washer pop out for fitting.