Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Slotted Furniture Anti-Tip Strap Anchor
A 90 x 34 mm furniture anti-tip anchor with one 50 mm slot and a 9.5 mm counterbore. Two #8 or #10 wood screws (4.2/4.8 mm) go in at any spacing up to about 45 mm, so it lines up with holes already in a dresser or bookcase back. The 25 mm webbing strap passes through a 26 x 4.5 mm slot and pulls along the plate, not across the layer lines. Print two: one for the furniture and one for the wall stud.
Dresser Drawer Center Rail Guide
Replacement plastic center guide for old wooden dressers and nightstands: a 46 x 58 x 21 mm saddle that straddles the cabinet's 3/4 in (19.05 mm) wood center rail so the drawer stops racking and dropping. The 21.2 mm channel carries four 0.8 mm skid ribs that pin the rail at 19.6 mm effective width for low-friction, slop-free travel, and four 4.5 mm holes take #8 / M4 screws up into the drawer bottom or rear rail; gussets under the flange keep the walls from spreading under side load.