Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
13-Bit Hex Shank Spade Bit Stand
A stand that holds a 13-piece set of 1/4 in hex-shank spade bits upright with the points up. It has 6.8 mm across-flats hex sockets, 18 mm deep, laid out in two staggered rows on a 26 mm pitch, and the back row is 12 mm higher so the paddles don't hit each other. It holds paddles up to 25 mm wide (1 in), is 172 x 44 x 36 mm, and screws to a bench or shelf through two 4.5 mm holes that take #8 wood screws or M4 bolts.
19-Size Metric Drill Bit Index
A two-tier bench index that holds 19 metric twist drills from 1.0 to 10.0 mm in 0.5 mm steps, each in its own graduated socket so the set stays in size order instead of loose in a drawer. Sockets are bit diameter + 0.5 mm (a 3.0 mm bit gets a 3.5 mm hole) and bottom out 2 mm above the plate; the 13 mm front tier keeps short small bits grabbable while the 22 mm rear tier gives the 6-10 mm bits 20 mm of guide. Overall 112 x 64 x 22 mm, with two 4.5 mm M4 clearance holes in the rear flange to screw it down to a bench or shelf.