Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Flex-Fin Console Cubby Three-Cell Tray
A 100 x 64 x 28 mm three-cell parts tray for odd-shaped car console and glovebox cubbies. Angled 1.7 mm flex fins on both long sides make it 72 mm wide, and they fold in to grip any cubby 66–72 mm wide and at least 100 mm long, so it doesn't rattle. It has one 57 x 60 mm main cell, two 37 x 29 mm small cells and a finger notch for lifting it out.
Glovebox Hinge Rebush Kit For 5 mm Pin
A sprue-frame kit for fixing sagging glovebox and console lids. You drill each worn, oval pivot hole out to a round 10 mm and press in a flanged bushing (9.8 mm body, crush ribs to 10.4 mm, 14 mm flange). A 5 mm steel rod then serves as the new hinge pin, in a 5.3 mm slip-fit bore, and two push-on collars hold the rod in place. The kit is four bushings and two collars on a 109 x 24 mm frame.