Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Canopy Leg V-Block Guy-Line Anchor
A 90° V-block that straps to a pop-up canopy or gazebo leg with a worm-drive hose clamp or strap through its two 14 x 3.5 mm band tunnels. It adds a ribbed tab with a 10 mm hole for a guy line or sandbag, so wind load goes to the ground and not into the plastic corner joints that tend to snap. The V seats round legs from 19 to 32 mm and 25 mm square legs set corner-in. The block is 56 mm tall and 36 mm wide, and the tab reaches 67 mm.
Flagged: lifting or tensioned load. Not for safety-critical use without independent engineering review.
Telescopic Mast Guy Ring Plate
A non-conductive three-point guy ring for fibreglass telescopic antenna masts: the 19° tapered bore self-seats anywhere the mast measures 32–50 mm OD, and three 122 mm-span arms each carry a pair of 8 mm line holes so a 3–4 mm guy line reeves through the outer eye and the tail wraps figure-8 around the 6 mm bridge — no cleat needed. A radial 3.4 mm boss takes an M4 nylon set screw to stop the ring creeping up, keeping every part of the assembly metal-free next to the radiator.