Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Three-Hole Guyline Tensioner Four-Pack
A snap-apart sprue of four flat three-hole guyline tensioners (45 x 14 x 4.5 mm each, 65 mm across the pack). They replace the lost or cracked sliders on tent, tarp and hammock-fly guylines. The 4.5 mm holes take 2–4 mm cord, up to 550 paracord, and both faces of every hole are chamfered so the cord grips without fraying.
Flagged: lifting or tensioned load. Not for safety-critical use without independent engineering review.
Print-In-Place Ratchet Line Tensioner
A two-piece print-in-place ratchet winch for tensioning guy lines, clotheslines, tarps and cargo cord up to 5 mm — the 34 mm drum spins on a captured 10 mm post and a curved flexure pawl locks a 12-tooth ratchet every 30° (about 9 mm of line per click), with a thumb tab to release. Base is 78 x 58 x 4 mm with two M4 clearance holes on 66 mm centres for wall, post or trailer mounting; overall 78 x 58 x 42 mm, prints flat with no supports.
Flagged: lifting or tensioned load. Not for safety-critical use without independent engineering review.