Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Drip Line Twin-Lane Zip-Tie Ground Stake
This 150 mm garden stake has two V-lanes in its head. The wide lane takes drip mainline about 12–20 mm OD, and the narrow lane takes small feeder tubing about 5–8 mm OD. A zip tie up to 5 mm wide goes through a channel under both lanes, wraps over the tubing and locks the line down so it can't blow out or get pulled up. It prints flat with a T-ribbed spike, so the bending load runs along the layers instead of across them, and it's stiffer than the bagged stakes that snap.
2x4 Open-Stud Straddle Cord Hook
A heavy hook for open-stud garage walls. A U-channel slides over the 38 mm (1.5 in) front edge of a 2x4 stud and holds with two #8 wood screws through the side legs, which have 4.8 mm clearance holes. A gusseted 70 mm arm with a 35 mm upturned lip then carries extension cords, air hoses or ropes without adding a backer board.
Flagged: mains electrical wiring. Not for safety-critical use without independent engineering review.