Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Abandoned Spigot Wall Blanking Plate
A 110 x 110 mm wall plate that covers the hole left behind when an outdoor hose bib is moved or capped. It covers wall openings up to 68 mm across, and its hollow 45° dome clears a capped pipe stub up to 24 mm OD sticking out 22 mm (wider near the wall). It mounts with four slotted #8 screw holes (4.8 mm, 8 mm of radial adjustment). The back has a caulk-bead groove and a 4 mm weep channel so trapped water drains instead of rotting the siding.
M5 J-Bolt Hose Bib Frost Dome
A reusable winter cover for an outdoor tap (sillcock/hose bib). Inside it is 105 mm across and 91 mm deep, and the 10 mm wide flange at the wall carries a strip of self-adhesive foam weatherstrip. The 5.5 mm centre hole takes an M5 J-bolt hooked behind the faucet handle, and a wing nut on the top boss pulls the dome tight to the siding. It replaces the foam domes that split after one freeze.
Four-Way Sillcock Key
A cross-shaped key for tamper-proof hose bibs, sillcocks and small valves that have no handle. It has four square sockets for 1/4" (6.35 mm), 9/32" (7.14 mm), 5/16" (7.94 mm) and 11/32" (8.73 mm) stems, each modelled 0.25 mm oversize, 16 mm deep, in 20 mm bosses. The key is 100 mm across and has a lanyard hole, so you can hang it by the spigot and stop losing the brass one.
Universal Hose Bib Handle Wheel
A 78 mm four-spoke replacement handwheel for outdoor spigots, hose bibs and sillcocks whose original handle has snapped or rusted off. The hub has a stepped square broach that drops onto 1/4 in (6.35 mm), 5/16 in (7.94 mm) or 3/8 in (9.53 mm) square valve stems, with a 5.5 mm through bore and an 11 mm washer counterbore for the original M5 / #10 / 8-32 retaining screw. Scalloped rim ribs give grip with wet or gloved hands; 24 mm tall overall.