Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
E-Scooter Kickstand Screw-Clamp Foot Pad
This wide foot slips over a worn or snapped e-scooter kickstand tip, including Xiaomi, Segway-Ninebot and Gotrax-style stands, so the scooter stops sinking into gravel or grass. The 80 x 50 mm pad carries a cup with a 34 x 14 mm pocket that is 22 mm deep. It grips any flat kickstand blade up to 34 mm wide and 0–13 mm thick with one M4 x 25 mm screw driven through a captured M4 nut, so you don't need the exact OEM blade size.
Zip-Tie Collet Bicycle Kickstand Foot
A replacement foot for a bicycle kickstand whose rubber tip has worn through or snapped off. A 22.5 mm four-slit collet socket fits round or flattened leg ends about 19–22 mm across and clamps shut with one 4.8 mm zip tie in the outer groove. The 80 x 56 mm buttressed pad keeps the bike from sinking into gravel or grass, and a drain hole stops water collecting in the socket.
Motorcycle Kickstand Support Pad
A 96 mm diameter load-spreading pad that stops a motorcycle or scooter side stand from sinking into hot asphalt, gravel or soft ground — the printed replacement for the hockey puck riders carry. A 50 mm ID x 12 mm deep cup traps the stand foot so it can't skate off, four drain slots clear water and grit, eight radial gussets carry the load out to the rim, and a 5.5 mm tether hole with a flush knot recess in the base takes paracord or an M5 shackle so it clips to the bike.