Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Light Switch Keep-On Toggle Guard
A screw-on hood that fits over a standard US single-toggle wall plate and keeps the switch from being flipped by accident. Use it on a freezer outlet, sump pump, bath fan or smart-bulb circuit. The 40 x 96 mm base has two slots that fit the plate's 6-32 screw holes at any spacing from 57 to 64 mm (2-3/8 in is the usual 60.3 mm). Fit it with two longer 6-32 screws (about 1 in). The 21 x 35 x 18 mm enclosed hood covers the toggle.
Bathroom Pull-Cord Switch Acorn Grip
A replacement acorn grip for a bathroom ceiling pull-cord switch. It's 28 mm across and 46 mm tall, with a 3.5 mm cord bore and an 18 mm knot pocket that opens at the bottom. A 2.2 mm side slot lets you press a 2–3 mm cord in from the side, so you never have to unthread it or touch the switch. A 45° roof over the pocket lets it print without supports, and eight flutes give you something to grip with wet hands.
Kids Light Switch Slide Extender
A print-in-place slide extender that mounts under the two screws of a standard US single-toggle wall plate (60.3 mm / 2-3/8" screw spacing, 6-32 screws through 4.5 mm holes). A captured 22 mm wide slider with a 12 x 14 mm toggle window and a pull tab 78 mm below the toggle lets small kids reach the switch.