Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Gang-Mount Power Tool Battery Wall Bay
This is a brand-neutral wall bay for power-tool battery packs, so you don't have to buy an OEM rack. It has a 100 mm wide bay with a 100 mm deep vented shelf and a 21 mm front lip, and takes slide-pack batteries up to about 95 mm wide. Each unit has a cheek on one side only, so you screw several in a row and each cheek divides it from the next bay. It mounts with four #10 (4.8 mm) wood screws through 5.5 mm holes with 10 mm counterbores, and it prints on its side so the shelf load runs along the layers instead of across them.
Flagged: battery or DC power. Not for safety-critical use without independent engineering review.
Dovetail-Linked Keyboard Wrist Rest Segment
A 150 x 74 mm keyboard wrist rest segment. Its sloped top rises from 8 mm at the wrist edge to 20 mm at the keyboard edge. A dovetail tab on one end drops into the socket on the next segment, so you can join two for a 60%/TKL board or three for a full-size one. Inside it has bridged cells and 2.4 mm ribs, so it prints stiff and light with no supports.