Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
P-Clamp Eight-Spindle Sort Board
A 150 x 100 mm tray with eight 4 mm spindles that hold loose rubber-lined P-clamps by their screw eyes: the back row takes 16, 19, 22 and 25 mm clamps and the front row takes 6, 8, 10 and 13 mm. The back wall has eight U-notches cut to the same sizes. Drop a fuel line, coolant hose or harness into the notches to find its diameter, then take the matching clamp straight off its spindle.
Flagged: automotive electrical. Not for safety-critical use without independent engineering review.
Spring-Fin P-Clamp For 18-24 mm Pipe
A one-piece P-clamp with a 29 mm split ring lined with five flexible spring fins. It grips 1/2 in EMT (17.9 mm), 1/2 in PVC (21.3 mm) or 3/4 in EMT (23.4 mm) without rattling, so you don't have to buy a box of 25 fixed-size clamps to get one odd size. Two 5.5 mm screw holes, 54 mm apart, take #8/#10 wood screws or M5 bolts into a stud or frame rail. Tightening the screw through the 14 mm wide strap closes the 4 mm tab gap and squeezes the ring onto the pipe. Thread the clamp onto the run before you fix it.