Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Cast Iron Skillet Handle-Hole Wall Hook
A gusseted wall hook for hanging a cast iron skillet or griddle by its handle hole. The tip is 14 x 12 mm, so it goes through any handle hole at least 15 mm across. The arm gives 56 mm of reach and ends in a 12 mm up-lip that keeps the pan from sliding off. The hook prints on its side, so the pan's weight bends it along the layers rather than across them. It mounts through the 90 mm tall back plate with two #8 (4.2 mm) pan-head wood screws in 5 mm clearance holes.
1/2 in EMT Pot Rail Wall End Bracket
Wall end bracket that holds a 1/2 in EMT conduit pot rail (17.9 mm OD, 18.4 mm socket, 20 mm deep) 55 mm off the wall, so pots and pans hang clear of the backsplash. It mounts with two #8 wood screws, has a braced gusset to carry the weight of heavy pans, and an M4 self-tapping set screw stops the rail from turning. Print a pair, one for each end of the rail.