Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
LM8UU Ten-Well Push-Out Storage Block
A 100 x 42 x 22 mm rack with ten 15.2 mm wells that hold spare LM8UU linear bearings (15 mm OD x 24 mm) standing upright. Each bearing sits 4 mm proud so you can grab it, and an 8 mm push-out hole under every well lets you pop out a stuck one with a rod or pen. The bearings stay clean and easy to count instead of rolling around in a bag.
Six-Bay 9V Snap Clip Lead Rack
A 136 x 36 x 24 mm bench rack for loose 9V battery snap connectors. Each of the six 12 x 30 x 20 mm oversize pockets holds one clip on edge, and a 3.5 mm slot in the front wall lets that clip's red/black leads hang out on their own so they can't knot together. Two end ears with 4.5 mm holes fit M4 or #6/#8 wood screws if you want to screw it to a bench or wall.
Flagged: battery or DC power. Not for safety-critical use without independent engineering review.
Anti-Static Bag Filing Rack
A desktop file rack that stands the anti-static zip bags your DigiKey/Mouser orders arrive in on edge instead of letting them pile in a drawer — six 10.5 mm slots on 12.7 mm pitch, raked back 14° against a full-width stop wall so 3x5 and 4x6 bags stay upright and readable. Each slot gets its own 10.5 x 22 x 11 mm well at the front for loose parts pulled from the bag, the 14 mm front lip takes a label strip, and M3 clearance holes through both 3 mm side walls let you bolt racks side by side. Footprint 80 x 105 x 40 mm.