Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Dovetail Cabinet Plinth Foot
The base foot of the 'Dovetail-Stacking Parts Drawer Cabinet' kit. It is a 70 × 130 × 8 mm ladder-frame plinth with a 7.4 → 10.4 mm dovetail tongue on top. The bottom 70 × 50 × 130 mm Dovetail Drawer Cell Housing slides onto the tongue from the front. Four 5.0 mm holes with 9.5 mm 90° countersinks take #8 wood screws (4.2 mm shank) to fix the column down, so it can't tip forward when you pull out a loaded drawer.
Zip-Tie V-Cradle Kickboard Leg Clip
A replacement plinth clip that screws to the back of a kitchen kickboard with two #8 wood screws. A 90° V-cradle then holds any round cabinet leg from 25 to 40 mm in diameter, and a zip tie through the two diamond tunnels locks it on. Because it isn't tied to one brand's groove profile, it works on any round leg. The part is 76 × 40 × 27 mm, and the vertical screw slots give ±5 mm of height adjustment.