Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Bike Thru-Axle And QR Skewer Wall Rack
A 150 x 42 x 45 mm wall rack that holds pulled bike axles head-up. It has two 15.8 mm slots for 15 mm thru-axles, two 12.8 mm slots for 12 mm thru-axles and two 5.8 mm slots for 5 mm QR skewers, so they stop rolling around the workbench while wheels are off. It mounts with three 5.5 mm holes for #8/#10 wood screws or M5, and it prints standing on its end so a gusset carries the axle load along the layers.
Print-In-Place Arca-Style Screw Clamp
This screw-driven quick-release clamp takes dovetail camera plates from about 32 to 48 mm wide, which covers standard Arca-style 38 mm plates. The sliding jaw is printed in place inside V-groove rails, and an M5 x 70 socket cap screw through the fixed jaw pulls it closed onto a captured M5 nut. The clamp is 90 x 62 x 22 mm, with three M5 clearance holes for bolting it to 2020 extrusion, a tripod head or a rig plate, so you don't have to buy a proprietary or discontinued plate.
Bayonet Twist-Lock Quick-Change Mount
A two-piece bayonet coupler that prints as one captive assembly: drop-in plug, twist 60° and three keys lock under the socket lip, past a detent bump and into a hard stop. Socket flange is 68 mm square with M4 clearance holes on a 56 mm square (14 mm tall); the 40 mm plug disc takes M4 on a 22 mm square, with a 20 mm centre pass-through for cable or a shaft — for swapping lights, sensor pods, cameras or tool heads off a fixed base.