Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
JST-XH Balance Lead Parking Tray
This 112 x 90 x 22 mm tray has five lanes for 2S–6S LiPo JST-XH balance leads. The lanes are 16, 18, 20, 22 and 24 mm wide, and raised dots on the floor show the cell count. Each lane has a cross wall with a 2.4 mm slot. The flat lead ribbon drops into the slot, but the plug housing can't pass through it, so plugs stay parked at the back and the leads coil in the 64 mm front bay without tangling or getting crushed.
Flagged: battery or DC power. Not for safety-critical use without independent engineering review.
Four-Bay LiPo Pack Caddy
A four-bay bench or wall caddy that stands RC LiPo packs upright, each bay 34 x 28 mm (fits packs up to about 33 x 27 mm in cross-section — the usual 2S/3S 1300–2600 mAh class) with a dedicated 10 mm rear channel per bay so the balance lead drops over a 36 mm divider wall and its plug hangs isolated from the neighbouring pack's main leads. Overall 148 x 47 x 52 mm, with a push-up window under each bay and two M4 clearance holes (4.5 mm) through the 4 mm back wall for wall mounting.
Flagged: battery or DC power. Not for safety-critical use without independent engineering review.