Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Sewing Pedal Anti-Slide Heel-Stop Tray
This walled tray holds a sewing machine or desk foot pedal up to 133 x 101 mm. A 24 mm heel-stop wall braces your heel so the pedal doesn't skate across hard floors while you sew. There are four 20.5 mm recesses underneath for stick-on rubber or felt pads, a cord exit notch at the front, and windowed ribs in the floor to save weight. The tray is 141 x 111 mm overall.
Twelve-Bobbin Thread-Tail Storage Tray
A 126 x 96 x 14.5 mm tray with twelve wells, each 26 mm across and 12.5 mm deep. Each well holds one sewing-machine bobbin up to 25 mm in diameter and 12 mm tall, such as a Class 15 (about 20.5 x 11.7 mm), Class 66 or L-style. A 12 mm finger trench runs along each row so you can pinch a bobbin out from the sides, and each well has a 2 mm angled slot to hold the thread tail so wound bobbins stay tidy and don't unravel.
Two-Cone Sewing Thread Stand
A free-standing thread stand that sits behind a sewing machine whose snap-in spool pin has broken off. It has two tapered pins (9 mm at the base, 6 mm at the tip, 64 mm tall) that hold serger cones or ordinary spools, and two 4 mm thread-guide eyes in a crossbar 150 mm up. The 140 x 74 mm footprint has gussets, and the crossbar is shaped at 45° underneath so it prints without supports.