Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Pilaster Shelf Clip Four-Width Sprue
Snap-off sprue of 16 hook-style shelf clips for slotted steel pilaster standards in bookcases, closets and store shelving, four clips each in 3.4, 4.0, 4.6 and 5.2 mm prong widths so you can match a slot the shops no longer stock (pick the column 0.2 to 0.3 mm under your measured slot width). Each clip is a single top hook (1.8 mm thick, 1.5 mm crook for steel up to 1.4 mm, needs a slot at least 6 mm long and 3.5 mm of cavity behind the strip) over a 16 mm bearing pad, with a 14 mm gusseted ledge and 2 mm front lip; it works on any slot pitch, and in PETG expect roughly 5 kg per clip, about a quarter of the steel originals.
Medicine Cabinet Glass Shelf Clip
Replacement side-wall channel clip that carries a 1/4 in (6 mm) glass shelf in an old steel or wood medicine cabinet, for when the original stamped clips are long discontinued. The 90 x 22 x 16 mm body has a 6.8 mm wide, 12 mm deep channel with a flared lead-in and a closed back stop, plus two 3.4 mm M3 clearance holes 70 mm apart on tabs clear of the jaws so a screwdriver reaches; the flat 4 mm back also takes VHB tape if you can't drill the cabinet. Symmetric about its centreline, so the same print flipped over serves the opposite wall — print two.