Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
1-1/4 in Grab Bar Saddle Soap Dish
This soap dish snaps onto a standard 1-1/4 in (31.75 mm) shower grab bar, so you don't have to drill new holes in the tile. The clip has a 32.2 mm bore and wraps 240° around the bar at both ends. The ribbed 72 x 80 mm tray sits directly above the bar, so the soap's weight doesn't twist it. Six drain slots let water run straight down onto the bar.
Three-Size Slit-Eye Zipper Pull Set
A sprue of three replacement zipper pulls for jackets, backpacks, tents and gear bags. Each is 44 mm long with a 2 mm-thick head so it passes under the slider bridge, a 3.5 mm eye that is 5, 7 or 9 mm wide, and a 0.8 mm slit you twist open to hook the pull onto the slider without tools. The grip is thickened to 3.2 mm with ribs and has a 3.4 mm lanyard hole, so you can add a cord loop for gloved hands. Snap off the pull that fits and print it in PETG so the slit can flex.