Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Five-Lane USB Cable Plug-Out Sort Tray
A 160 x 100 x 35 mm drawer tray with five 29.8 mm lanes for coiled charge and data cables. Each lane has an 8 mm U-notch in the front wall, so you drop the cable in and its plug hangs out front. You can see USB-C, Micro, Mini, Lightning or USB-A at a glance without digging. The notch only holds the 3–6 mm cable jacket, so it works whatever size the plug overmould is.
E12 Resistor Twelve-Slot Index Box
A 105 x 55 mm box with 12 slots, one for each E12 value (10, 12, 15, 18, 22, 27, 33, 39, 47, 56, 68, 82). Each slot is 7 mm wide and 51 mm deep and holds small poly bags or taped strips of that value, one bag per decade. The front of each slot has 1 to 12 moulded dots, so you can find a value by counting, with no printed labels to smudge or peel. The top slopes from 45 mm at the back to 28 mm at the front, which leaves the bag tops easy to read and grab.
O-Ring ID Sizing Peg Tray
A 150 x 72 mm lipped bench tray with ten chamfered sizing pegs from 5 to 22 mm diameter. The front row is 5, 6, 8, 10 and 12 mm, left to right, and the back row is 14, 16, 18, 20 and 22 mm. Tip a mixed bag of unlabeled O-rings, grommets or seals into the tray. Slide each ring down the largest peg it fits snugly and stack it there, so every stack is sorted by inside diameter and you can find the size without a caliper.
Hose Clamp Size Sorting Tower
A stepped cone that sorts a jumbled bag of worm-drive hose clamps by size — drop each clamp over the top and it hangs on the first shelf too wide for it. Eight tiers at 64, 56, 48, 40, 34, 28, 22 and 16 mm diameter over an 84 mm tall tower, on an 82 mm flange with three 4.5 mm M4 clearance holes to bolt it to a bench or pegboard shelf. Hollow conical core keeps it to about 45 cm³ of plastic.