Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Pull-Down Faucet Sprayer Cone Dock
This screw-on cone cradle holds a pull-down or side-spray faucet head that has lost its snap-in dock. It works with any head whose hose end is 20 to 52 mm across. The hose drops in through an 18 mm front slot and a 20 mm bottom opening, then the head sits nose-up in the 45 mm deep cone. Mount it on a backsplash or cabinet side with two or four #8 wood screws through 5.0 mm holes in the 70 x 60 mm back plate.
Handheld Bidet Sprayer Wall Cradle
A screw-on replacement cradle for the cheap handheld bidet sprayers whose thin plastic holder snaps off the wall — you can't buy the cradle alone, only the whole kit. The 50 x 100 mm backplate takes three counterbored M4 screws (two at the top, one at the bottom) so it can hit fresh anchors instead of the wallowed-out original holes, and two gusseted shelves with tapered snap-past-lip slots cradle any sprayer neck from 16 to 22 mm and barrel from 20 to 26 mm; it stands 36 mm off the wall.