Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Stand Mixer Attachment Wall Hook Rack
A 150 x 62 mm wall or cabinet-door rack with three rising 12 mm hook fins that hang a stand mixer's flat beater, whisk and dough hook by their open frames, with an 8 mm lip that keeps them from sliding off. It mounts with two #8 wood screws (4.8 mm clearance holes, 50 mm apart). It prints upright with the fins doubling as feet, so the hook arms take load inside the layers.
624 Bearing Appliance Slider Rail
A 150 x 30 x 18.5 mm roller rail that lets a heavy stand mixer, espresso machine or air fryer be pulled out from under the upper cabinets with one hand instead of being dragged across the counter. Each rail carries two 624 bearings (4 x 13 x 5 mm) on M4 x 25 screws — 4.5 mm clearance hole with a recessed head on one side, 3.4 mm self-tapping thread on the other — so the outer races sit 1.5 mm proud of the rail and roll; the 22 mm wide top tray with a 2.5 mm rim keeps the appliance foot from walking off. Print two rails per appliance.