Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Print-In-Place 25 mm Webbing Cam Buckle
A print-in-place cam buckle for 25 mm (1 in) webbing. It replaces the cracked buckle on a tie-down, roof-rack or tote strap that is normally only sold as a whole strap. A toothed eccentric cam pivots on 5 mm integral stubs in 6 mm cheek bores, closing a 1.5 mm strap gap down to about 0.6 mm, and the fixed end loops round a 10.5 mm slot behind the bar. The buckle measures 35 x 53 x 21.5 mm.
Flagged: lifting or tensioned load. Not for safety-critical use without independent engineering review.
Power Station Strap-Down Corner Cleat
A screw-down corner cleat that holds a Jackery, EcoFlow or Anker portable power station in place on a van, shed or workshop shelf. It works with any size of unit: use one at each corner. Each cleat has two 35 mm tall, 5 mm thick walls with 72 mm legs and two gussets on each wall. Each wall has a 22 x 4 mm slot for 20 mm webbing, so a strap can go over the top. It fixes down with five #8 wood screws or M4 bolts through 4.5 mm holes.
Flagged: lifting or tensioned load. Not for safety-critical use without independent engineering review.
Canopy Leg V-Block Guy-Line Anchor
A 90° V-block that straps to a pop-up canopy or gazebo leg with a worm-drive hose clamp or strap through its two 14 x 3.5 mm band tunnels. It adds a ribbed tab with a 10 mm hole for a guy line or sandbag, so wind load goes to the ground and not into the plastic corner joints that tend to snap. The V seats round legs from 19 to 32 mm and 25 mm square legs set corner-in. The block is 56 mm tall and 36 mm wide, and the tab reaches 67 mm.
Flagged: lifting or tensioned load. Not for safety-critical use without independent engineering review.
Screw-Through Cargo Tie-Down Hook
A screw-on J-hook that replaces a snapped cargo-net or tie-down hook in an SUV, wagon or trailer. It has a 70 x 16 mm base flange with two M4 / #8 clearance holes (4.5 mm) on 50 mm centres, and a 15 mm entry throat that takes net loops, bungee hooks and strap hooks. It prints on its side, so the pull from the strap runs along the layers instead of across them.
Flagged: lifting or tensioned load. Not for safety-critical use without independent engineering review.
Bungee Cord Seven-Peg Wall Rail
A 160 x 42 x 44 mm wall rail with seven pegs on 22 mm centres. Each peg has a 9 mm flat seat and an 8 mm lip, so a bungee cord's steel hook drops on and stays put instead of ending up in a tangle in a bucket. It mounts with three #8 pan-head or washer-head wood screws through 4.8 mm holes. Each peg is printed as a 6 mm upright fin, so the hanging load runs along the layers and can't peel them apart.
Flagged: lifting or tensioned load. Not for safety-critical use without independent engineering review.
Ratchet Strap Drill Winder Spool
A spool that winds loose ratchet straps and tie-downs into a tidy coil instead of a tangled ball: thread the strap tail through the two 3.6 mm slots in the drum and spin it. The 88 mm flanges and 54 mm clear drum take a 2 in (50 mm) strap, the Ø16 mm spindle has a 6.7 mm across-flats socket for a 1/4 in hex bit so a cordless drill does the winding, and an 8.3 mm cross hole takes an 8 mm rod or screwdriver shank as a hand crank.
Flagged: lifting or tensioned load. Not for safety-critical use without independent engineering review.
Print-In-Place Rope Cam Cleat
A three-piece print-in-place cam cleat that jams 4–8 mm rope or paracord one-way for tarps, roof racks, awnings and van-life tie-downs — pull to tension, lift the line out to release. Base is 76 x 54 x 16 mm with four 5.5 mm M5 clearance holes on a 60 x 42 mm rectangle; the two toothed cams ride on 6 mm printed pins with retaining heads and are closed by 1.2 mm curved flexure springs, with 4.5 mm guide ribs fairleading the line in.
Flagged: lifting or tensioned load. Not for safety-critical use without independent engineering review.