Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Rain Shower Arm Wall Brace
A screw-to-wall truss brace that holds up a long, sagging rain-shower arm with a 90° V-saddle sized for 19–22 mm OD arms (1/2" IPS pipe is 21.3 mm). Zip-tie slots strap the arm down. The saddle supports the arm 50–112 mm out from the wall and clears a cover plate up to about 80 mm across. Two 5.5 mm holes take #8/#10 screws, with a driver access hole for the top screw. Overall 112 x 117 x 20 mm.
Worm-Drive Hose Clamp Standoff Saddle
A screw-down V-saddle that raises a coolant, fuel, vacuum or bilge hose (about 15–40 mm OD) 18 mm off a vibrating firewall or hull. A standard worm-drive band clamp up to 13 mm wide, or a zip tie, passes through a 14 x 3 mm tunnel and wraps over the hose, so the clamp holds the hose in the saddle and never rubs on the panel. The base is 90 x 28 mm with two 5.5 mm holes for M5 or #10 screws.
Flagged: automotive electrical. Not for safety-critical use without independent engineering review.