Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Pi 4 VESA 75/100 Monitor Back Mount
A 114 x 114 mm vented plate that fits both VESA mount patterns: 75 x 75 and 100 x 100 mm, with 4.5 mm M4 clearance holes. It turns a Raspberry Pi 4B / 3B+ into a thin client or kiosk bolted to the back of a monitor. The Pi sits 8 mm up on four standoffs that match its 58 x 49 mm hole pattern, with M2.5 clearance holes and screw-head counterbores on the monitor side. The board clears every VESA screw head, and a pair of zip-tie slots holds the power cable as strain relief.
VESA 75 To 100 Adapter Plate
A 118 x 118 x 6 mm adapter plate that lets a VESA 75 x 75 monitor hang on a VESA 100 x 100 arm or wall mount: four 4.5 mm M4 clearance holes on the 100 mm square go to the arm, and four 4.5 mm holes on the 75 mm square are counterbored 9.5 mm x 4 mm deep so the monitor screw heads sit flush and never foul the arm head. A 56 mm centre window passes the video and power cables, and two 5 x 10 mm slots at the bottom edge take a zip tie or velcro strap for cable dressing.
VESA Monitor Back Utility Shelf
A 114 x 114 mm plate that bolts to a monitor's VESA 75 x 75 or 100 x 100 M4 pattern (sandwiched under the arm/stand screws) and carries a 92 x 50 mm tray with 23 mm side walls and a 7 mm front rail behind the screen. A 62 mm centre window clears the arm head, twin 5 x 16 mm strap slots and a 10 mm cable pass-through hold a USB hub, dongle receiver, SSD or mini PC off the desk.