Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Wide Twin-Hanger Cleat Bin
This wide open-top scoop bin is part of the 'Printed French Cleat Bin Wall' kit. It measures 160 x 100 mm and is 70 mm tall at the back, sloping to 40 mm at the front. It bolts to two Cleat Bin Hanger Brackets set 80 mm apart with four M3x12 socket head cap screws, which pass through 3.4 mm rear-wall holes at x = ±40 mm and z = 15/45 mm and thread into the hangers' captured M3 nuts. Three 2.8 mm grooves at x = −26, 0 and +26 mm take the kit's slide-in dividers, and the front has a 100 x 14 mm label recess.
Small Scoop Cleat Wall Bin
An open-top scoop parts bin for the 'Printed French Cleat Bin Wall' kit. It measures 80 wide x 100 deep x 70 mm tall at the back, sloping to 40 mm at the front. It bolts to one Cleat Bin Hanger Bracket with two M3x12 socket head cap screws, which pass through 3.4 mm holes spaced 30 mm apart and thread into the hanger's captured M3 hex nuts. Inside are two divider grooves 2.8 mm wide at ±12.5 mm for the kit's slide-in dividers, and the front has a 50 x 14 mm label recess.