Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Open-Bottom Low-Voltage Splice Hood
A one-piece rain hood for wire-nutted 18–22 AWG low-voltage splices, such as sprinkler valve wire, landscape lighting or doorbell cable. It mounts open end down so water drains out instead of collecting. The cavity is 60 x 38 x 70 mm, with two ribs inside that have zip-tie slots for strain-relieving the bundle and a rear notch for a cable running along the wall. Overall it's 90 x 44 x 72 mm and fixes with four #8 wood screws through 5 mm ear holes.
Four-Bay Wire Nut Scoop Caddy
A 144 x 70 x 28 mm caddy with four bays that get wider from left to right (26, 30, 36 and 42 mm). Sort twist-on wire connectors by size, from grey and blue up to yellow and red, so you stop digging through a loose bag halfway through a job. Each bay has a 45° scoop ramp at the front so you can slide a connector out with one finger, and two 4.5 mm holes let you screw the caddy to a bench, a cabinet door or a truck drawer.