Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Bidet Attachment Slotted Hinge Bolt Plate
A stiff 180 x 44 x 4 mm plate that goes between the bowl and a bidet attachment in place of the flimsy bundled bracket. Its two 12 mm slots take 3/8 in or M10 seat hinge bolts at any spacing from 125 to 155 mm, which covers the standard 5.5 in (140 mm) spacing with room either side. There are 5 mm tick notches on the rear edge for centring the plate, and a cut-out window to save material.
Handheld Bidet Sprayer Wall Cradle
A screw-on replacement cradle for the cheap handheld bidet sprayers whose thin plastic holder snaps off the wall — you can't buy the cradle alone, only the whole kit. The 50 x 100 mm backplate takes three counterbored M4 screws (two at the top, one at the bottom) so it can hit fresh anchors instead of the wallowed-out original holes, and two gusseted shelves with tapered snap-past-lip slots cradle any sprayer neck from 16 to 22 mm and barrel from 20 to 26 mm; it stands 36 mm off the wall.