Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Through-Glass Shower Door Knob M5
A replacement shower door knob, 40 mm across and 35 mm tall. Print two and join them through the glass with a length of M5 threaded rod. Each knob has an M5 hex nut pocket (8.3 mm across flats), a 22 mm deep M5 clearance bore and a 25 mm × 2.2 mm recess on the glass face for a rubber washer. It fits 6–10 mm glass with any hole of 6 mm or larger, so you can replace a cracked plastic knob without tracking down the original part.
Frameless Mirror Wall Clip
A J-channel wall clip for a frameless bathroom vanity mirror: a 1.5 mm printed leaf spring inside the 10 mm channel preloads any glass from 3 to 6 mm thick so the mirror can't rattle or slide, and a 14 x 3 mm drain notch through the front lip lets water out from under the glass edge. 34 mm wide x 32 mm tall x 22 mm deep, mounts with two 4.5 mm holes (M4 or #8 wood screws) counterbored 3.5 mm deep so the heads sit clear of the glass — print four, two below the mirror carrying the weight and two above retaining it.