Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
1-1/4 in Grab Bar Handheld Shower Wand Cradle
A tapered cup that holds a handheld shower wand and sits on a 1-1/4 in (31.75 mm) grab bar. This puts the wand within reach of someone showering seated, and there's no drilling into tile. Two zip ties hold the 64 mm wide 90° V-saddle onto the bar in recessed grooves. The cup measures 44 mm across and 34 mm tall, and its cone tapers from 22 to 35 mm, so it wedges most wand necks. A 17 mm front slot lets you drop the wand in with the hose still attached.
Shower Arm Clamp-On Handheld Shower Cradle
A tapered cradle for a handheld shower head that clamps onto a straight, horizontal 1/2 in shower arm (21.3 mm OD, 22 mm bore), so you don't need to drill the tile. The cone tapers from 19 to 31 mm ID to fit most handles, a 16 mm front slot lets the hose slip in, and one M4 x 30 screw and nut pinch the clamp tight. Slide it onto the arm before you screw the diverter back on.
Snap-In Shower Hose Wall Guide
A screw-mount snap clip that holds a handheld shower or bidet hose (14–17 mm OD) against the tile, so the hose stops dangling in the tub, kinking or slapping the glass. The saddle has a 17.5 mm bore and a 13.5 mm mouth with a funnel lead-in. The 70 x 22 mm base has two countersunk 4.5 mm holes 52 mm apart, which take #6, #8 or M4 screws into wall plugs.