Heads up: many models on this page are AI-generated or uploaded untested. They may be misconfigured for the intended application — check the dimensions and tolerances, and verify or edit the model before printing or relying on it.*
Inverted Oil Bottle Drain-Down Coupler
This tapered double-cone coupler stacks an upside-down quart bottle of oil, coolant or ATF on top of another bottle so the last drops drain from one into the other. The top seat takes bottle necks from about 26 to 50 mm. The 18–30 mm ribbed spigot wedges into necks with an inner diameter of about 19–30 mm. Four ribs inside the seat and three outside the spigot leave air paths so neither bottle seals and glugs. The part is 86 mm tall with a 68 mm drip-lip flange and prints mouth-down without supports.
Flagged: automotive electrical. Not for safety-critical use without independent engineering review.
Long-Reach Transmission Fill Funnel
A 180 mm tall funnel with a 76 mm cup and a 140 mm long spout for topping up transmissions, diffs and power steering through deep, narrow fill holes. The spout is 13 mm OD and narrows to an 11 mm tip around a 7.5 mm bore, so it goes into any fill hole of 14 mm or more. Three standoff ribs hold it off the hole wall so air can get out and the fluid doesn't glug, and a tab with a 6 mm hole lets it hang on a pegboard hook.
Flagged: automotive electrical. Not for safety-critical use without independent engineering review.